WOODS

 

 

 

 

 

 

 

.

PULSAR Spring Face Woods

These exclusive wood heads push the limits in leading edge, advanced technology golf club design. Distance, accuracy and all other playing characteristics (feel, sound, forgiveness, address) are at their best, due to the following facts:

The woods feature an ultra-thin face with a geometrically milled pattern on the inside, which provides the desired "spring effect" (COR ~ 0.830).

The heads are made of only two pieces: the cast monocoque body and the forged high-strength CNC milled face. The 2-piece structure combines the advantages of a casting and a forging design and saves about 15 grams in weight compared to a common 3-piece design. This weight can be redistributed in the head to achieve more forgiveness and better playing characteristics.

The face is applied with an outer-ring welding instead of the common inner-ring welding. This leads to a better energy link between body and face and enlarges the hitting area, gaining maximum accuracy and adding to the bounce effect.

The body is cast with a square rib net over the thin sheet which allows for a larger volume and reduces sound.

		Hosel Port #3 +#5 max 6g #3645 - RH #3646 - LH (only 10 degree driver)
No Item No. Loft Lie Weight ccm F. Angle F. Height Price RH LH 1 3645-8.0 8 56 200 305 0.5 open 49 mm $79.00 BUY 1 3645-9.5 9.5 56 200 305 square 49 mm $79.00 BUY 1 3646 10 56 200 305 1 closed 54 mm $79.00 BUY 1 3645-11 11 56 200 305 0.5 closed 49 mm $79.00 BUY 3 3645-3 15.5 57 208 198 0.5 closed 43 mm $67.50 BUY 5 3645-5 20 58 218 175 0.5 closed 40 mm $67.50 BUY Material: Body: Custom 450 Face: Aermet 310 Hosel Bore: Driver: 8.6 x 30 + 7.5 x 14 mm (Hosel Port) Hosel Bore #3 + #5: 8.6 x 27 + 7.5 x 9 mm (Hosel Port)

 

to top

 

.

TRU POWER 400 ccm Titanium Driver

A huge 400ccm titanium driver which is also very playable at address. The optimised balance of mass distribution and outer shape leads to improved energy transfer from the club head to the ball, and particularly high-handicap players will appreciate the large sweet spot with forgiveness on off-centre hits and the 2° closed hook face. A slightly lower launch with lower backspin provides optimum flight trajectory with a long-way roll. Recommended for a playing length of 45" or even 46" in combination with an ultra light graphite shaft.

		#3694 - RH only
No. Item No. Loft Lie Weight ccm F. Angle F. Height Price   1 3694-9.0 9 56 200 400 2 closed 61 mm $69.00 BUY 1 3694-10.0 10 56 200 400 2 closed 61 mm $69.00 BUY Bulge: 2" Roll: 12" Material: Titanium 6AI/4V Forged

 

to top

 

.

CMG 360 SERIES - Ti Driver and Fairway Woods

A large club head that still looks fairly compact; our new Titanium 360 is not only aiming at the high handicapper but should also appeal to single handicappers. In practical tests this head proved to be very comfortable in playing with a well-balanced feedback.

Players have reported that it left nothing to be desired regarding distance and tight shot dispersion. The thin hitting face made from ß-plus titanium 15/3/3/3 allows for a spring effect that is within the R&A limits (COR < 0.829). The Titanium 360 is simple and elegant without any trappings, and its solid reinforced body delivers a beautiful sound that sets it apart from some of the "cans" that are currently sold.

		#3670 driver - RH only #3671 fairway woods - RH only
No. Item No. Loft Lie Weight ccm F. Angle F. Height Price   1 3670 10.5 57 194 360 closed 54 mm $98.00 BUY 3 3671-3 16 57 210 184 square 37 mm $39.50 BUY 5 3671-5 20 58 215 164 square 36 mm $39.50 BUY 7 3671-7 24 59 220 161 square 36 mm $39.50 BUY Material Driver: Body: 16/4 Titanium Face: beta plus Titanium 15/3/3/3 Material Fairway Woods:Stainless Steel 17/4 Hosel Bore Driver: 8.5 x 36

 

to top

 

.

CMG TITANIUM 350 4-MATRIX

This Titanium Driver with a superb sound is made from a 4-piece structure. The shell, soleplate and hosel insert (with separate weight port) are made of 6/4 Titanium, while the super-thin face is forged from â-Titanium 10/2/3. This allows for a very precise manufacturing with tight tolerance.

The large but still compact head featuresgreat playing characteristics, based on its huge sweet spot, its internal weight distribution and the enlarged hittingarea that delivers a good "spring effect" (COR~ 0.826). It is perfectly suitable for players in the mid handicap range.

		#3677 - RH only
No. Item No. Loft Lie Weight ccm F. Angle F. Height Price   1 3677 10 55 200 350 square 49 mm $129.00 BUY Material Body: 16/4 Titanium Face: 10/2/3 beta Titanium Hosel Bore Driver: 8.6 x 30 + 7.5 x 14 mm (Hosel Port)

 

to top

 

.

IRONWOOD II The Troubleshooter!

The Ironwood II is closer to a wood than to an iron, while still keeping the shape and the volume of an up-to-date "troubleshooter" head. The critical point with successful fairway shots is staying "under" the ball.

The Ironwood II will help you achieve that with its flat profile, rounded sole and a very low centre of gravity due to its thick soleplate with an additional copper-tungsten insert. The thin face is made of super-hard managing steel and it provides maximum energy transfer from head to ball and more backspin. Weight, loft and lie specifications are similar to classic metal woods allowing standard club lengths and swingweights.

		#3612 - RH only
No. Item No. Loft Lie Weight ccm F. Angle F. Height Price   3 3612-3 13 57.7 208 140 1 closed 31 mm $34.50 BUY 4 3612-4 16 58 213 130 1 closed 30 mm $34.50 BUY 5 3612-5 19 58.5 218 125 1 closed 30 mm $34.50 BUY 6 3612-6 22 59 223 110 1 closed 29 mm $34.50 BUY Material Body: Stainless Steel Face: Maraging Steel

 

to top

 

.

SYNERGYY III

The design of this new game improvement wood series positions the center of gravity as low and as far rearward as possible, giving most players enhanced control over the trajectory. Both, driver and fairway woods, feature a massive sole with a particularly long middle section, a thin and light face and a slight offset of the hosel bore to achieve this goal. On top of that the driver also has a weight bar at the rear transition between sole and shell. The additional milling of the face offers a most welcome ''spring effect'' within the limit of the R&A regulations (~8.826).

The slight bulge of the fairway woods helps minimize the shot dispersion at horizontal off-center hits. Only a minimal roll has been applied to the face of these woods which promotes a more consistent launch pattern than conventional stronger roll. The new Synergyy III driver and fairway woods match each other perfectly and are designed to help particularly the high to mid handicap players to correct some of the most typical swing errors as far as technically possible.

Driver	Fairway	Driver: # 3690-10.0 RH #3390 -10.0 LH Fairway: #3682 RH # 3382 LH
No.   Loft Lie Weight ccm F. Angle F. Height Price RH LH 1 10 58 194 400 1 closed 55 mm $98.50 BUY BUY 3 15 58 210 165 .5 closed 35 mm $39.50 BUY BUY 5 17 58 216 155 .5 closed 35 mm $39.50 BUY BUY 7 20 59 222 135 .5 closed 33 mm $39.50 BUY BUY Material: Stainless Steel 17-4 / Maraging Steel Inserts: Brass #1: #3-7: 12.5, F=8665W

 

to top

 

.

SYNERGYY 2000 Metalwood for Men

A club head that should appeal to everyone from pros to novices - with a shallow face and classic lofts and lies, intended for the fairway use; with extremely forgiving playing characteristics on off-centre hits; with an extreme support to stay "under" and "behind" the ball during the swing, following the thoughts of Mr. Harvey Penick.

		#3680 RH #3380 LH
No.   Loft Lie Weight ccm F. Angle F. Height Price RH LH 1 10.5 56 200 200 square 37 mm $27.50 BUY BUY 3 15 56 208 144 square 29 mm $27.50 BUY BUY 5 19 57 218 130 square 29 mm $27.50 BUY BUY 7 23 58 228 115 square 28 mm $27.50 BUY BUY Material: Stainless Steel 17-4 / Maraging Steel Inserts: Brass

 

to top

 

.

SYNERGYY 2000 for Ladies

The loft and lie angles of this beautiful head are slightly different from the men's model. It is particularly designed for shorter clubs, which require a flat lie, and for slower swing speeds which require more loft to achieve maximum distance. It's ideal both for ladies and gentlemen who are not so tall.

		#3681 RH #3381 LH
No. Loft Lie Weight ccm F. Angle F. Height Price RH LH 1 12.5 54 200 200 square 37 mm $27.50 BUY BUY 3 16 55 208 144 square 29 mm $27.50 BUY BUY 5 20 56 218 130 square 29 mm $27.50 BUY BUY 7 24 57 228 115 square 28 mm $27.50 BUY BUY Material: Stainless Steel 17-4 / Maraging Steel Inserts: Brass

 

to top