 |
|
|
|
 |
|
||
|
Home | About
Us | Store Policies and Shipping
| |
|
||
 |
|
||
|
|
|
|
|
|
 |
|
||||
 |
|
||||
 |
 |
|
|||
 |
|
||||
 |
|
||||
 |
|
||||
 |
|
||||
 |
|
||||
 |
|
||||
 |
|
||||
 |
|
||||
 |
|
||||
 |
|
||||
 |
|
||||
 |
|
||||
|
|||||
 |
|
||||
 |
|
||||
 |
|
||||
 |
|
||||
 |
|
||||
 |
|
||||
 |
|
||||
|
|||||
 |
|
||||
 |
|
||||
 |
 |
 |
|
||
 |
|
||||
 |
|
||||
555 C Cavity Back Forged Irons New!
A new forged design created from the original 550C tooling, with a completely new sole design for greater playability and more consistent shotmaking.
Full face to back radius sole with heavily radiused leading edge to deliver more shotmaking consistency from lies in the fairway and rough.
Their thin topline, low offset and classic players' shape make the 555C a design admired by all discerning golfers. True forged from the 1035 soft carbon steel through a 5-step forging process which affords greater production shape/grind consistency.
555C and 555M are designed to match perfectly with each other for true custom set makeup.
New satin nickel chrome plating finish with glass bead blast highlights and new cosmetics, available in #2-9, PW, AW, SW.
| W2555C RH only | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
555 M Muscle Back Forged Irons New!
A new forged design created from the original 550M tooling, with a completely new sole design for greater playability and more consistent shotmaking.
Full face to back radius sole with heavily radiused leading edge to deliver more shotmaking consistency from lies in the fairway and rough.
It's thin topline, low offset and classic players' shape make the 555M a design admired by all discerning golfers.
True forged from 1035 soft carbon steel through a 5-step forging process which affords greater production shape/grind consistency.
555C and 555M are designed to match perfectly with each other for true custom set makeup.
New satin nickel chrome plating finish with glass bead blast highlights and new cosmetics, available in #3-9, PW, AW, SW.
| W2555M RH only | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
550 C - Cavity Back Forged Irons
The 550C is a true Cavity Back design. It is forgiving on off-center hits and can be recommended for all levels of players. The unique new "mini-shot" blast surface in the cavity back sets a fine contrast to the bright Nickel/ Chrome finish, which gives this iron its distinguished look.
Forged irons custom-ground by Tom Wishon have won several million dollars on the PGA Tour. The 550 irons are undoubtedly the best forged carbon steel irons he has ever designed. They feature a "tour grind" shape sole design rounded slightly from front to back and on the leading and trailing edges minimizing sticking in the turf on fat shots.
These irons are billet forged from 1035C Mild Carbon Steel. Their fifth forging step reduces the amount of grinding required to prepare the irons for nickel/chrome electro-plating. This also produces optimal material density ensuring more consistency of shape in the set. All score lines, the hosel bore and even all the logo/wording are CNC machined for greater accuracy. Due to their true match, the 550C and 550M are designed to intermingle so you can choose selected iron heads from each set. The most typical is to use the #2, 3, 4 from the 550C with the #5, 6, 7, 8, 9, PW from the 550M.
| W2550C RH only | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
The 550M is a classic Muscle Back design which is preferred by better ball strikers. This iron also shares the Bright Mirror finish of the 550C with the high precision CNC machined structures.
Forged irons custom-ground by Tom Wishon have won several million dollars on the PGA Tour. The 550 irons are undoubtedly the best forged carbon steel irons he has ever designed. They feature a "tour grind" shape sole design rounded slightly from front to back and on the leading and trailing edges minimizing sticking in the turf on fat shots.
These irons are billet forged from 1035C Mild Carbon Steel. Their fifth forging step reduces the amount of grinding required to prepare the irons for nickel/chrome electro-plating. This also produces optimal material density ensuring more consistency of shape in the set. All score lines, the hosel bore and even all the logo/wording are CNC machined for greater accuracy. Due to their true match, the 550C and 550M are designed to intermingle so you can choose selected iron heads from each set. The most typical is to use the #2, 3, 4 from the 550C with the #5, 6, 7, 8, 9, PW from the 550M.
| W2550M RH only | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Full game improvement forged carbon steel irons with fully cnc milled back cavity. 5 step forged carbon steel design with deep cavity back weight distributions and CG position created by CNC machining of the entire back cavity.
The wider, game improvement sole is custom ground with
front/back radius to reduce incidence of "fat"
shots. 5-Step True Forged from 1035 Carbon Steel for
Soft Feel, Even in a Cavity Back. Deep Progressive Weight
Distribution Cavity Back Created by CNC Machining.
Larger head shape/size accents the game improvement
design of the 560MC forged irons.
| W2560MC RH only | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Performs
well with Interflexx shafts and Series
5 Steel shafts |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
705 W2 Irons New!
Traditional, slightly oversize design with progressive back cavity weighting and tour radiused/beveled sole
Two weight bores on each head allows additions of up to 15 grams to allow for easier MOI matching or assembly to shorter custom fit lengths.
Their progressive back cavity design moves the CG progressively from low on the long irons to higher on the short irons - ideal for most golfers.
The beveled leading/trailing edge with tour radius sole offers golfers the ideal sole design for reducing "fat" shots and easier play from fairway or rough. A traditional profile and shape combines with low offset to offer an ideal combination of game improvement with classic, traditional design features.
| W2705 RH Only | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
730 CL Hybrid Irons and Wedges
The Wishon Series 7 Full set concept is expressly for slow
swing speeds. #5, 6/7, 8/9 hybrid body irons with conventional
PW and DW have 6° loft increments. The hybrid iron face
heights progress in face height - wedge face profiles are designed
to blend in face profile to the 8/9 hybrid iron. The "Split-level
Sole" design of hybrid irons plays like wide sole conventional
iron.
0.335" bore in the 5, 6/7, 8/9 irons for installation with TWGT's high launch, 0.335" tip design. 0.370" bore in the wedges to afford more control. Hybrid iron hosels are bendable +/-2° for custom lie fitting NOTE: Recommended to use metal wood bending machine to avoid top crown marring, or order custom bent by TWGT.
Hosel weight bore in all 730CL heads for custom swingweight/MOI fitting.
The 730 CL Hybrid Irons and Wedges are part of the entire 730 CL intelligent set. Click to see the matching products: Driver & fairway woods | 730 CL Ultra Light Graphite Shafts | Grips | Headcovers
| W2730 - RH only | |||||||||||||||||||||||||||||||||||||||||||||||||||||||
 Click to view larger image |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||
We recommend 730 CL Ultra Light graphite shafts |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||
752 TC - Trajectory Control Irons
752TC is a full, deep cavity back iron in a slightly larger overall size. Together with the beautifully scalloped side walls this design provides distinct perimeter weighting, thus allowing for a better feel and more distance when hit off-center. The thicker top line, an extended weight pad off the back of the sole and a higher offset in the long irons move the Center of Gravity farther back from the shaft, helping to increase the trajectory and backspin.
The "Smart-Sole" design- a wide sole area for lower CG, with the front and back edges radiused up - helps to reduce sole surface contact for less chance of "fat shots". With its traditional profile shape and design the 752TC can be recommended for all player types, particularly for those who seek higher ball flight and forgiveness on off-center hits.
| W2752 RH - W2752L LH | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
770 CFE - Computer Face
Engineered Irons
Variable thickness thin-face technology combined with variable face materials within a single set of irons - it's another Tom Wishon first in the golf industry! The new 770CFE Irons use three different steel alloys with decreasing hardness from the long to the short irons (see chart). This material transition helps to match the loft and face deflection capability in each iron, as well as the impact feel as loft increases through the set.
Variable face thicknesses generate a higher ball speed-to-swing speed ratio for the golfer. The head body design moves weight back from the face to assist in optimizing the launch angle. The entire lower back area is moved well back of the face, and tilted away from the face to bring the Center of Gravity farther to the rear. With its very distinct features the 770CFE aims at players who need more iron distance and tend to hit the ball off-center more often.
Award
Winning Irons: |
 |
 Top Concept Award |
| W2770 - RH W2770L - LH #4-PW |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
585HI Hybrid Long Irons - New!
Long iron replacement hybrids with the appearance of a conventional iron
Conventional iron shape, profile and appearance in a true hybrid long iron replacement design, designed to be custom built to iron lengths.
0.335" bore to match with TWGT's graphite and steel hybrid shafts, one of the real secrets to TWGT's high performance hybrid designs.
Perfect sole design for a wide sole shape - no bounce, raised/radiused leading edge and wall thickness to ensure low and rear CG position for higher launch angle.
Micro-groove scorelines to enhance backspin for higher trajectory and better bite for long distance shot into the green.
Designed in #2, 3, 4 and 5 iron lofts to replace those hard to hit conventional irons in a design that looks like an iron.
| W2585HI RH - W2585LHI LH | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Performs well
with GI-335 graphite
shafts |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
785 HF Hot Face Hybrid Irons
Another design "first": HF irons are a full set of true hybrid body irons with ultra thin hot face technology intended to be a full set alternative to conventional thin body irons.
#2 - 9, PW available, each iron is a 2-piece investment cast construction, with super thin high COR face. Face Profile shapes progress taller from long through short irons and wedge in the manner of conventional iron face profiles.
785 Hot Face irons are designed with progressively thinner faces, each forged and machined from the same alloy used to make the first 0.830 COR fairway woods in the game - 515GRT. High COR iron face performance exists all the way through the PW - with conventional lofts for each iron, golfers will still notice a definite increase in distance over every head in their present iron set. 785HF soles are "split-level" designed to reduce actual sole to turf contact to make each 785 head. Play more like a conventional wide-sole iron.
Heat Treated to allow lie angle alteration +/-2 degrees. 785HF hosels are fully satin finished to minimize hosel marring from bending. NOTE: 785 top shape WILL require use of a metal wood bending machine to prevent marring the finish on the top of the heads. TWGT will offer bending for lie angle +/-2g from design specification for each head.
0.335" bore on #2 through 6, 0.370" bore on the #7 through PW - allows use of high launch GI-335 graphite or Series 5 Hybrid steel in the low lofted irons, but a conventional iron shaft in the short, high lofted irons. Optional 370 to 335 shims available for golfers who wish to use the GI-335 or Series 5 Hybrid in the short irons.
| W2785 - RH only | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 Click to view larger image |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Performs well with GI-335 shafts (#2-6 irons) and ZT Series shafts (#7-PW) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
321 LI
Hybrid Long Irons
Model 321Li hybrid long irons are the ultimate in true hybrid long iron design due to the accompanying design of the matching GI-335 graphite or the Series 5 Steel small tip iron shafts.
TWGT research has shown that the shaft can be a visible contributor to the launch angle, but only if the shaft is designed to bend/deflect an amount much greater than is typical with a conventional iron shaft. Typical iron shafts have a larger tip diameter which can only bend/deflect 1-2" in the swing. The GI335 and Series 5 Steel .335 shaft are designed with the same butt stiffness as a conventional iron shaft, but with a small tip design to increase the launch angle and trajectory of the shot.
321Li full hybrid long iron heads are designed in a #1, 2, 3, 4, 5 and 6-iron. Matched with any set of irons, the 321Li offers golfers a much higher trajectory from the bending of the unique small iron tip design of the GI-335 and Series 5 Steel shafts.
321Li full hybrid long iron heads are designed with a hosel to face position that is much more like a true iron for the proper appearance and set up at address.
A cross-section view of the wall thickness of the 321Li head design shows another reason for the easy playability of this model - the rear wall of each 321Li is extremely thick to pull the CG farther back from the shaft to further assist with increasing the launch angle of the shot.
321Li full hybrid long iron heads are finished in an attractive dark grey metallic with bright satin highlights on the sole and toe/heel.
W2321 RH - W2321L LH
No Loft Lie Weight Face
ProgBulge Roll Vol. Material: 17/4 stainless steel Loft/Lie Bending: Only with metalwood L/L bending machine. Expect marring Hosel length: 52 mm Bore Depth: 30 mm Weight Bore: Yes
969 W Wide Sole Irons
This is TWGT’s newest full game improvement iron with deep, undercut cavity and wide sole design. Ultra wide sole design offers golfers the widest sole design in the TWGT Design Line for Low Center of Gravity and Ease of Play.
Beveled and raised leading and trailing edges are ideal for golfers with a steep angle of attack and superb for play from tall grass.
Zero bounce sole heel eliminates ‘catching’ the heel on uneven lies and improves solidness of hit for players with an outside/in swing path.
Full undercut back cavity keeps the center of gravity low and farther back from the face to ensure a higher launch angle.
Unique ‘under-slung hosel’ and flatter topline slope angle keeps the center of gravity closer to the shaft for more control.
Precision investment cast from 431 stainless steel, finished in a striking bright satin with glass bead blast highlights
| W2969 RH only | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
PCF Micro Tour Wedges Satin/Chrome or Platinum New!
TWGT's new traditional narrow sole wedge design with milled face and Micro-groove scorelines, destined to become a classic
Traditional, narrow sole, classic shape/profile stands as the finest overall shape and set-up behind the ball in a TWGT original wedge design.
Numerous wedge fitting options in 48°/PW, 52°/AW, 56°/SW, 58° and 60°
CNC milled face with Micro-groove scorelines to fully maximize every golfer's ability to spin the ball. Tests with Trackman launch monitor verify a 1000 rpm increase in spin rate compared to typical U-groove scorelines.
Zero-bounce grind heel ensures the leading edge remains low to the ground when the face is rolled open for finesse shots.
Available in satin chrome and platinum nickel plating finishes, with LH models in the 52° and 56°.
| W2307 Satin; W2307-P Platinum Tour Model W2306 Wide Sole, W2306L Wide Sole Left Hand |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 Satin Chrome Finish |
 Platinum Finish |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
CX Micro Wedges - Satin/Chrome or Platinum
Another innovative TWGT design first to offer maximum spin capability for all golfers.
CNC face milling with micro-groove scorelines makes the CX-Micro wedges the ultimate for short game spin control.
USGA conforming, CNC machined face milling to increase surface roughness between micro-groove scorelines.
USGA conforming, micro-groove scorelines allows more scoreline edges to be in contact with the surface of the ball at impact.
Zero bounce heel design to reduce 'bladed' shots when the face is rolled open.
Investment cast from soft 304 stainless steel to deliver a forged-feel and allow a wide range of custom loft and lie options.
Designed in 52°, 56°, 58° and 60° lofts and available in both brushed satin nickel chrome and platinum nickel plated finish with glass bead blast highlights..
| W2305 RH - W2305L LH (56 only, Chrome only) | ||||||||||||||||||||||||||||||||||||||||||||||||||
 Chrome finish |
 Nickel Platinum Finish |
|||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||
PCF Wedges Closing out
The PCF Wedge brings together simple beauty with confidence-inspiring playability. This traditional wedge features a classical full round profile shape and a full tour grind on the leading edge as well as on the sole. The completely functional dual sole design enables players to use the wedge with the face rolled open without affecting the sole angle and thus avoiding raising the leading edge to the point of producing a bladed or poor shot. This provides more confidence for real finesse shots with slow club head speed. P-Series wedges are investment cast for accuracy but from a very soft stainless alloy (304, softer than virtually all carbon steels), for a softer feel. Available in classic mirror chrome or nickel platinum finish. A wide sole version (Ni/Plat) offers the greatest forgiveness in soft sand and tall grass.
| Regular Sole: W2303 RH - W2303L LH - Wide sole: W2304 RH Only | |||||||||||||||||||||||||||||||||||||||||||||||||||||||
 Regular Sole / Chrome finish |
 Wide Sole / Nickel Platinum Finish |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||
TWGT Ferrules
 |
All TWGT club heads and ferrules are designed to match perfectly in their respective diameters, so there is no final filing, sanding or cloth belt buffing needed. | ||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||