Hand Tools

 

 

.

RUBBER CLAMPS

Secure shafts and heads without damaging or scratching the surface.

#8892 For heads $34.60 - BUY	#8913 For shafts $6.75 - BUY
	#8895 For shafts alluminium reinforced $27.50 - BUY

 

to top

.

SHAFT CUTTERS

#8858 For steel shafts (Do not use for graphite shafts!) $28.50 - BUY #8858R Replacement blade $5.90 - BUY

#88140 For graphite shafts (may be used for steel shafts too) $8.75 - BUY #8858R Replacement Blade $1.35 - BUY

 

to top

 

.

RULER

A 48" ruler made of solid aluminium, with inch scale and standard club length indication for men and women. #8460 Ruler $36.50 - BUY

 

to top

 

.

SHAFT TIP IDENTIFICATION GAUGE

The positive gauge to idenfity shaft tips from .277" to .500". #8985 Shaft tip identification gauge $24.75 - out of stock .

 

to top

 

.

DRILL BITS

For irons (9.5mm) #88205 - $5.95 - BUY #88206 Extra High Quality $17.90 - BUY

For woods (8.5 mm) #88203 -$4.95 - BUY #88204 Extra High Quality $15.70 - BUY

 

to top

 

.

GRIP TAPE AND FERRULE STRIPPER

This CNC-machined tool made of solid aluminium saves time when removing ferrules before reshafting or peeling off old grip tape. #85110 Sripper $44.90 - BUY #85112 Replacement blade $29.50 - BUY

 

to top

 

.

PRO GRIP STRIPPER

#8235 - $82.50 - BUY

A professional tool to remove old grips quickly and efficiently. Replaceable double hook knife. May be mounted on a work bench or to be fixed in a vice. Saves a lot of time for clubmaker shops!

 

to top

 

.

COUNTERSINK TOOLS

#8593 Deburrer $42.50 - BUY	#8594 - 20° Countersink $49.90 - BUY
Coning tools to prevent graphite shafts from breakage caused by the inner hosel edge.

 

to top

 

.

HOSEL BRUSHES

#8750I for 0.370" $7.95 - BUY #8750W for 0.335" $7.95 - BUY	With handle: #8750IH - $9.95 - BUY #8750WH - $9.95 - BUY
Perfect for cleaning out old epoxy, e.g. when reshafting.

 

to top

 

.

HOSEL CLEANER

#8730A - For irons $21.50 - BUY #8730B - For woods $21.50 - BUY

This is the favourite tool in our repair shop to remove broken steel shafts: with a universal 95-98% success rate, even on iron shafts broken flush with the hosel. Use with wrench (below).

 

to top

 

.

BROKEN SHAFT EXTRACTOR

#8731 - $36.50 - BUY

Use to remove steel shafts broken off at hosel. Thread Shaft Extractor into broken shaft with Extractor Wrench. Slide extracting sleeve over Shaft Extractor and install nut and washer. Apply heat to break epoxy bond. Use 1/2' wrench to back out broken shaft.

 

to top

 

.

EXTRACTOR & HOSEL CLEANER WRENCH

#8999B Handle for Hosel Cleaner and Broken Shaft Extractor $24.90 - BUY

 

to top

 

 

.

RAM ROD

50” heavy duty 1/4” diameter cold roll steel ram rod. Perfect for tamping corks down shaft for swing weighting with powdered tungsten. Use to drive club head from shaft when difficult to remove. 1 1/4” comfortable rubber grip. #85115 Ram Rod - $33.50 - BUY

 

to top

 

.

HYMEC BACKSPIN TOOL

#8475 - $59.40 - out of stock .

Deepens or restores score lines to ensure straighter ball flight and better "bite" on the green. Made of hardest tungsten carbide.Square and V-Grooves.

 

to top

 

.

GRIP REMOVER

#88215 - $39.90 - BUY

This effective and extraordinary simple tool keeps grips intact for re-use; comes with a complete instruction.

 

to top

 

.

MULTI GRIP INSTALLER

Great for conventional grips, indispensible for oversized butt grips. 865" #81801 - $25.80 - BUY

 

to top